LISTINGLIGHT®
Click on the numbers to see each step
|
|
Installation Tips
- If you use the rounded-top sign with the post (i.e. Prudential Agents) use the Long LISTINGLOCKS to insure that your LISTINGLIGHT will fit properly between your sign and post.
- To test your LISTINGLIGHT before sunset use a dark piece of tape to cover clear sensor located on the side of the battery pack. Or you can place the LISTINGLIGHT in a dark room for up to 3 minutes.
Please Note: Using your thumb may not work.
- To illuminate only 1 side of your yard sign unscrew the timer cover and disconnect the arm you don’t want to use.
- For signs that are thicker than ¾’’ remove the suction cups and drill 2 wooden screws downwards into your sign or install on the top of your sign.
- If you use the metal frame and your LISTINGLIGHTS tends to lean more to one side than the other. Simply insert 2 small pieces of cardboard on the opposite side and that should balance it out
